CORECASE
CORECASE
CORECASE is a portable, compact, lightweight coring rig for quickly obtaining drilled cores of concrete (ASTM C42) or other materials alike.
CORECASE has a thin-walled aluminium coring barrel that along with high-performance diamond bits and a special coupling for the drill machine that minimizes vibration, allow taking cores that are accurate in diameter, have straight and smooth sides, and are perpendicular to the surface.
Concrete core drill machine.
- Visual inspection of the concrete interior
- Determination of in-place compressive strength or other mechanical properties
- Verification of flaws identified by NDT methods such as the s’MASH impulse-response system; the DOCter impact-echo system; and the MIRA and EyeCon pulse-echo systems
- Preparing a partially drilled core for conducting a pull-off test with BOND-TEST following BS 1881:207 or ASTM C1583
- Other laboratory tests such as rapid chloride penetration using the PROOVE’it system, bulk conductivity/resistivity using Merlin, air-void parameters using the RapidAir system, or for petrographic analysis
Version: | CORECASE CS-75 | CORECASE CEL-100 |
Material | Aluminium rig and barrel with steel diamond bits | |
Max. core diameter | 75 mm | 100 mm |
Max. core height | 110 mm | 220 mm |
Rig diameter | 125 mm | 100 mm |
Weight* | 4.8 kg | 2.6 kg |
Length* | 600 mm | 340 mm |
Length, extended* | 800 mm | 460 mm |
Optional vacuum pump and suction plate | Yes | No |
*without drill or coring bit
Concrete core drill machine.
CORECASE CS-75 (75-mm core) Kit
Includes:
Item | Order # |
|
Coring rig with coupling | CC-10 |
|
Handles for coring rig, 3 pcs | CC-20 | |
Coring bit, 75 mm x 110 mm | CCB-75/110 | |
Water pump with 2 hoses | CC-30 | |
Clamping pliers, adjustable, 2 | CC-40 | |
Set of anchoring tools, 8 mm | CC-50 | |
8 mm expansion anchors, 20 | CC-60 | |
Chisel | CC-70 | |
Hammer | CC-80 | |
Core lifter, 75-mm diameter | CC-90 | |
Wrench, 14 mm | CC-100 | |
Measuring tape | CC-110 | |
Set of spare bearings for coring rig | CC-120 | |
Reinforcement locator | CC-130 | |
Manual | CC-140 | |
Attaché case | CC-150 |
Optional Items:
Item | Order # |
|
Suction plate | CC-160 |  |
Vacuum pump | CC-170 | |
1150 W electric drill | CC-180 | |
Extension rods, 100 mm long, for drilling deeper than 110 mm | CC-190 |
CORECASE CEL-100 (100 mm core) Kit
Includes:
Item | Order # |  |
Coring rig with coupling | CC-15 | |
Handles for coring rig, 3 pcs | CC-20 | |
Coring bit, 100 mm x 210 mm | CCB-100/210 | |
Water pump with 2 hoses | CC-30 | |
Clamping pliers, adjustable, 2 | CC-40 | |
Set of anchoring tools, 12 mm | CC-55 | |
12 mm expansion anchors, 20 | CC-65 | |
Chisel | CC-75 | |
Hammer | CC-80 | |
Core lifter, 100-mm diameter | CC-95 | |
Wrench, 14 mm | CC-100 | |
Measuring tape | CC-110 | |
Set of spare bearings for coring rig | CC-120 | |
Reinforcement locator | CC-130 | |
Manual | CC-145 | |
Attaché case | CC-155 |
Optional Items:
Item | Order # |
|
1150 W electric drill | CC-180 | |
Extension rods, 100 mm long, for drilling deeper than 210 mm | CC-190 |
To be ordered separately
For CORECASE CS-75 |
| For CORECASE CEL-100 | ||
Core diameter × length | Coring bit # |
| Core diameter × length | Coring bit # |
25 mm × 110 mm | CCB-25/110 |
| 25 mm × 210 mm | CCB-25/210 |
35 mm × 110 mm | CCB-35/110 |
| 35 mm × 210 mm | CCB-35/210 |
50 mm × 110 mm | CCB-50/110 |
| 50 mm × 210 mm | CCB-50/210 |
75 mm × 110 mm | CCB-75/110 |
| 75 mm × 210 mm | CCB-75/210 |
|
|
| 100 mm × 210 mm | CCB-100/210 |
ASTM C42: “Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete”
EN 12504-1: “Testing concrete in structures. Cored specimens. Taking, examining and testing in compression”